Precise assembly of the field of view switching component of the common optical path system

ZHAO Hongjun; XV Hongwei; ZHANG Xiangming; WANG Songlin; LIU Weiguang; YANG Xiaoqiang; LIN Qi; RUAN Yue

您当前的位置：

首页 >

文章列表页 >

Precise assembly of the field of view switching component of the common optical path system

Optical Devices & System Design | 更新时间：2026-03-24

- Precise assembly of the field of view switching component of the common optical path system
- OPTICAL TECHNIQUE Vol. 52, Issue 2, Pages: 135-139(2026)
- 作者机构：
  
  1.西安应用光学研究所，陕西西安 710065
  2.北方光电股份有限公司，陕西西安 710000
- 作者简介：
- 基金信息：
- DOI：
  CLC： TJ05;TH745
- Received：26 June 2025，
  
  Revised：2025-11-11，
  
  Published：20 March 2026
- 稿件说明：
移动端阅览
赵红军,徐红伟,张向明等.共光路系统视场切换组件精密装配[J].光学技术,2026,52(02):135-139.

ZHAO Hongjun,XV Hongwei,ZHANG Xiangming,et al.Precise assembly of the field of view switching component of the common optical path system[J].OPTICAL TECHNIQUE,2026,52(02):135-139.
赵红军,徐红伟,张向明等.共光路系统视场切换组件精密装配[J].光学技术,2026,52(02):135-139. DOI：

ZHAO Hongjun,XV Hongwei,ZHANG Xiangming,et al.Precise assembly of the field of view switching component of the common optical path system[J].OPTICAL TECHNIQUE,2026,52(02):135-139. DOI：

摘要

针对共光路光学系统精密装配技术的要求，开展视场切换组件的装调工艺技术探索。基于理论分析与实验验证，设计了兼顾视场切换效率与成像稳定性的齿轮驱动机构与磁铁吸附定位机构，并根据结构特点，提出高效精确的装配工艺方案。该工艺保障了视场切换组件在光学成像系统中的稳定性与可靠性，提升整体性能，对推动光学成像技术发展应用意义重大。

Abstract

Aiming at the requirements for precision assembly technology in common-path optical systems

the alignment and assembly process technology are explored for the field-of-view switching module. Based on theoretical analysis and experimental verification

a gear drive mechanism and a magnetic adsorption positioning mechanism were designed to balance switching efficiency with imaging stability. According to the structural characteristics

an efficient and precise assembly process scheme is proposed. This process ensures the stability and reliability of the field-of-view switching module in optical imaging systems

improves overall performance

and is of great significance for promoting the development and application of optical imaging technology.

关键词

Keywords

references

Smith W J . Modern optical engineering [M ] . 5th ed . New York : McGraw-Hill Education , 2017 : 218 - 243 , 356 — 379 .

常伟军 , 李超良 , 杨华梅 , 等 . 一种双视场电视/激光测距接收共光路一体化机设计 [J ] , 应用光学 , 2024 , 45 （ 3 ）: 39 — 44

Chang Weijun , Li Chaoliang , Yang Huamei , et al . Integrated machine design with common path on TV camera with dual filed of view and laser ranging reception [J ] , Journal of Applied Optics , 2024 , 45 （ 3 ）: 39 — 44 .

杨晓强 , 陶忠 , 刘莹奇 . 中小型共光路系统支撑结构设计和分析 [J ] . 应用光学 , 2023 , 44 （ 5 ）: 998 — 1009 .

Yang Xiaoqiang , Tao Zhong , Liu Yingqi . Design and analysis of support structure of small and medium-sized common optical path system [J ] . Journal of Applied Optics , 2023 , 44 （ 5 ）: 998 — 1009 .

胡博 , 陶忠 , 秦川 , 等 . 用于激光定向红外对抗的光学系统设计 [J ] . 应用光学 , 2021 , 42 （ 3 ）: 398 — 403 .

Hu Bo , Tao Zhong , Qin Chuan , et al . Optical system design for laser directional Infrared countermeasure [J ] . Journal of Applied Optics , 2021 , 42 （ 3 ）: 398 — 403 .

亓晨 , 靳阳明 , 谢晓喻 , 等 . 共光路红外双波段小型化光学镜头分析与设计 [J ] . 红外与激光工程 , 2024 , 53 （ 4 ）: 20230722 .

Qi Chen , Jin Yangming , Xie Xiaoyu , et al . Miniaturization analysis and design of the common-optical path dual-wave infrared optical lens [J ] . Infrared and Laser Engineering , 2024 , 53 （ 4 ）: 20230722 .

方喜波 , 乔红垒 , 基于共光路中快反镜的复合轴控制和回扫补偿技术分析 [J ] , 红外技术 , 2023 , 45 （ 11 ）: 1230 — 1235 .

Fang Xibo , Qiao Honglei . Analysis of composite axis control and flyback compensation technology based on fast reflector in common optical patch [J ] . Infrared Technology , 2023 , 45 （ 11 ）: 1230 — 1235 .

Li Xet al . Machine learning-driven assembly optimization for complex optical systems [J ] . Nature Communications , 2022 , 13 , 1234 .

王康生 , 林峰 , 谢忠鑫 , 等，用于多光谱相机的机器视觉系统设计 [J ] . 应用光学 , 2025 , 46 （ 2 ）: 233 — 241 .

Wang Kangsheng , Lin Feng , Xie Zhongxin , et al . Machine vision system design for multispectral cameras [J ] . Journal of Applied Optics , 2025 , 46 （ 2 ）: 233 — 241 .

Chen L , et al . Nanometer-level positioning accuracy in diamond-turned optical components [J ] . Optics Express , 2020 , 28 （ 15 ）: 21456 — 21465 .

惠刚阳 , 张博 , 左晓舟 , 等 , 高低温试验装置中多光谱光学窗口组件设计 [J ] , 应用光学 , 2023 , 44 （ 3 ）: 661 — 683 .

Xi Gangyang , Zhang Bo , Zuo Xiaozhou , et al . Design of multispectral optical window assembly for high and low temperature test device [J ] . Journal of Applied Optics , 2023 , 44 （ 3 ）: 661 — 683 .

Wang Y . Zhang X . MEMS-based active alignment for high-precision optical systems [J ] . IEEE Transactions on Components , Packing and Manufacturing Technology , 2021 , 11 （ 3 ）: 456 — 465 .

Guo B , et al . Digital twin for predictive calibration of optical assemblies [J ] . Optical Engineering , 2023 , 62 （ 3 ）: 2911 — 2919 .

宫鹏 , 程路超 , 董健 , 等 . 铺层角度误差对CFRP平面反射镜面形影响研究 [J ] , 红外与激光工程 , 2019 , 48 （ 08 ）: 185 — 191 .

Gong Peng , Cheng Luchao , Dong Jian , et al . Influence of layup angle errors on surface figure of CFRP planar mirrors [J ] , Infrared and Laser Engineering , 2019 , 48 （ 08 ）: 185 — 191 .

李明 , 张伟 , 王芳 . 机载宽温条件下反射镜组件与粘接层设计 [J ] , 光学精密工程 , 2023 , 31 （ 12 ）: 2345 — 2352 .

Li Ming, Zhang Wei, Wang Fang, Design of mirror assembly and bonding layers for airborne wide-temperature conditions [J ] . Optics and Precision Engineering , 2023 , 31 （ 12 ）: 2345 — 2352 .

陈涛 , 刘震宇 . 单反式光端机反射镜柔性支撑参数优化设计 [J ] . 红外与激光工程 , 2023 , 48 （ S1 ）: 112 — 118 .

Chen Tao , Liu Zhenyu . Parametric design of flexible support for SLR optical terminal mirrors [J ] . Infrared and Laser Engineering , 2023 , 48 （ S1 ）: 112 — 118 .

冯军 , 李思远 , 王飞橙 , 等 . 基于有限元分析的大口径曲面棱镜胶接优化设计 [J ] . 光子学报 , 2024 , 53 （ 11 ）: 1122002 .

Feng Jun , Li Siyuan , Wang Feicheng , et al . Optimization design of large aperture curved prism bonding based on finite element analysis [J ] . Acta Photonica Sinca , 2024 , 53 （ 11 ）: 1122002 .

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

No data

Related Author

No data

Related Institution

No data

⁰