超快激光加工不锈钢流动传热特性研究

蒋志凯; 施舜泽; 何志强; 杨东翰; 李凌

您当前的位置：

首页 >

文章列表页 >

超快激光加工不锈钢流动传热特性研究

激光技术及应用 | 更新时间：2026-03-24

- 超快激光加工不锈钢流动传热特性研究
- Investigation of flow and heat transfer characteristics in ultrafast laser processing of stainless steel
- 光学技术 2026年52卷第2期页码：156-163
- 作者机构：
  
  1.上海理工大学能源与动力工程学院，上海 200093
  2.上海船舶设备研究所，上海 200031
- 作者简介：
  
  蒋志凯（2001— ），男，硕士研究生，从事超快激光加工方面的研究。lejiangzk@163.com
  李凌（1976— ），女，教授，博士，从事微尺度传热方面的研究。liling@usst.edu.cn
- 基金信息：
  
  国家自然科学基金(52476156)
- DOI：
  中图分类号： TN249
- 收稿：2025-11-25，
  
  修回：2026-01-26，
  
  纸质出版：2026-03-20
- 稿件说明：
移动端阅览
蒋志凯,施舜泽,何志强等.超快激光加工不锈钢流动传热特性研究[J].光学技术,2026,52(02):156-163.

JIANG Zhikai,SHI Shunze,HE Zhiqiang,et al.Investigation of flow and heat transfer characteristics in ultrafast laser processing of stainless steel[J].OPTICAL TECHNIQUE,2026,52(02):156-163.
蒋志凯,施舜泽,何志强等.超快激光加工不锈钢流动传热特性研究[J].光学技术,2026,52(02):156-163. DOI：

JIANG Zhikai,SHI Shunze,HE Zhiqiang,et al.Investigation of flow and heat transfer characteristics in ultrafast laser processing of stainless steel[J].OPTICAL TECHNIQUE,2026,52(02):156-163. DOI：

摘要

超快激光加工金属过程中，金属表面相变引发的熔体流动对加工质量具有显著影响。研究采用双温度模型耦合流体动力学的方法，模拟研究了皮秒激光作用下不锈钢表面的温度场、熔体流动特性及形貌演变，并分析了激光能量、激光移动速度等工艺参数对烧蚀效应的影响。结果表明：熔体流动显著影响烧蚀效应。相比于不考虑熔体流动的传统模型，考虑熔体流动的模拟结果与实验数据吻合良好，平均相对误差仅为7.5%，预测精度得到了显著提升。熔体流动主要受反冲压力与热毛细力的作用，并决定了最终的熔池形貌。在移动激光多脉冲作用下，熔体流动会导致中间凸起结构的形成。此外，随激光能量从1J/cm

增至5J/cm

，烧蚀坑深度由8.2nm增至34.6nm；激光移动速度从0.15μm/ps提升至0.25μm/ps时，热影响区宽度增加了约30%。研究结果为优化激光加工参数和提升微纳结构加工质量提供了理论依据。

Abstract

Ultrafast laser processing of metals induces surface phase change and melt flow

significantly impacting processing quality. A numerical model coupling the two-temperature model with fluid dynamics was developed to investigate the transient temperature field

melt fl

and morphology evolution of stainless steel under picosecond laser irradiation. The influence of laser fluence and moving speed on ablation characteristics was systematically evaluated. The results indicate that melt flow is critical to the ablation effect. Compared with traditional models neglecting hydrodynamics

the simulation results considering melt flow show good agreement with experimental data

with an average relative error of only 7.5%

indicating a significant improvement in prediction accuracy. The melt flow is primarily driven by recoil pressure and thermocapillary forces

which predominantly determine the final melt pool morphology. For moving multi-pulse processing

the melt flow leads to a central peak. Additionally

as the laser fluence increases from 1 J/cm

to 5 J/cm

the ablation depth grows from 8.2 nm to 34.6 nm. Increasing the moving speed from 0.15 μm/ps to 0.25 μm/ps causes an approximately 30% expansion in the width of the heat-affected zone. These findings provide valuable insights for optimizing ultrafast laser processing parameters and improving micro/nano-scale surface fabrication quality.

关键词

Keywords

references

Geng Z , Bi X , Shi J . Corrosion resistance of AISI 304 stainless steel in belitic calcium sulfoaluminate cement [J ] . Cement and Concrete Composites , 2025 , 162 : 106154 .

王迎春 , 杨彬 , 万程 , 等 . 冷处理对低碳马氏体不锈钢组织性能的影响 [J ] . 北京理工大学学报 , 2025 , 45 （ 02 ）: 213 — 218 .

Wang Yingchun , Yang Bin , Wan Cheng , et al . Cryogenic treatment effect on microstructure and tensile properties of a low-carbon martensite stainless steel [J ] . Transactions of Beijing Institute of Technology , 2025 , 45 （ 02 ）: 213 — 218 .

Pang X , Zhang B , Li S , et al . Machining performance evaluation and tool wear analysis of dry cutting austenitic stainless steel with variable-length restricted contact tools [J ] . Wear , 2022 , 504 : 204423 .

苏天颜 , 刘超 , 全宏升 , 等 . 熔融石英玻璃飞秒激光微纳加工研究 [J ] . 光学技术 , 2023 , 49 （ 06 ）: 664 — 672 .

Su Tianyan , Liu Chao , Quan Hongsheng , et al . Research of femtosecond laser micronano processing of fused quartz glass [J ] . Optical Technology , 2023 , 49 （ 06 ）: 664 — 672 .

姜永霞 , 李隆 , 程雨露 , 等 . 高斯脉冲激光烧蚀钛合金热效应分析研究 [J ] . 光学技术 , 2025 , 51 （ 02 ）: 189 — 195 .

Jiang Yongxia , Li Long , Cheng Yulu , et al . Analytical study of the thermal effect of Gaussian pulsed laser ablation on titanium alloys [J ] . Optical Technology , 2025 , 51 （ 02 ）: 189 — 195 .

Anisimov S I , Kapeliovich B L , Perelman T L . Electron emission from metal surfaces exposed to ultrashort laser pulses [J ] . Zh. Eksp. Teor. Fiz , 1974 , 66 （ 2 ）: 375 — 377 .

Qiu T Q , Tien C L . Short-pulse laser heating on metals [J ] . International Journal of Heat and Mass Transfer , 1992 , 35 ( 3 ): 719 - 726 .

Qiu T Q , Tien C L . Femtosecond laser heating of multi-layer metals—I. analysis [J ] . Previews of Heat and Mass Transfer , 1995 , 1 ( 21 ): 1 .

Omenaca L , Gomez-Aranzadi M , Ayerdi I , et al . Numerical simulation and experimental validation of ultrafast laser ablation on aluminum [J ] . Optics & Laser Technology , 2024 , 170 : 110283 .

Vora H D , Santhanakrishnan S , Harimkar S P , et al . Evolution of surface topography in one-dimensional laser machining of structural alumina [J ] . Journal of the European Ceramic Society , 2012 , 32 ( 16 ): 4205 - 4218 .

Sharma S , Mandal V , Ramakrishna S A , et al . Numerical simulation of melt pool oscillations and protuberance in pulsed laser micro melting of SS304 for surface texturing applications [J ] . Journal of Manufacturing Processes , 2019 , 39 : 282 - 294 .

Zhou T , Hong Y , Fang Z , et al . Experimental and numerical study of multi-pulse picosecond laser ablation on 316 L stainless steel [J ] . Optics Express , 2023 , 31 ( 23 ): 38715 - 38727 .

Zhang J , Hu J , Su C , et al . Finite element simulation of the removal mechanism and ablation morphology of HA bio-coating by nanosecond laser ablation [J ] . Optics & Laser Technology , 2025 , 180 : 111448 .

He Z , Yang D , Zhang M , et al . Coupling effect of evaporation-plasma shielding and its influence on femtosecond laser ablation [J ] . Applied Physics A , 2024 , 130 ( 12 ): 935 .

Bukelis T , Gaižauskas E , Balachninaitė O , et al . Femtosecond IR and UV laser induced periodic structures on steel and copper surfaces [J ] . Surfaces and Interfaces , 2023 , 38 : 102869 .

Tsibidis G D , Mimidis A , Skoulas E , et al . Modelling periodic structure formation on 100Cr6 steel after irradiation with femtosecond-pulsed laser beams [J ] . Applied Physics A , 2018 , 124 ( 1 ): 27 .

Singh B K , Kapil S , Joshi S N . Thermo-flow modeling of geometry evolution considering the velocity flow fields during pulsed-laser processing [J ] . International Journal of Thermal Sciences , 2025 , 209 : 109511 .

Ye W L , Sun A D , Zhai W Z , et al . Finite element simulation analysis of flow heat transfer behavior and molten pool characteristics during 0Cr16Ni5Mo1 laser cladding [J ] . Journal of Materials Research and Technology , 2024 , 30 : 2186 - 2199 .

李成玉 . 基于COMSOL的皮秒激光烧蚀304不锈钢仿真与实验研究 [D ] . 南京 : 南京农业大学 , 2019 .

Li Chenyu . Simulation and experimental study of picosecond laser ablation of 304 stainless steel based on COMSOL [D ] . Nanjing : Nanjing Agricultural University , 2019 .

余天锡 , 李隆 , 姜永霞 , 等 . 铝合金板激光增材制造温度特性模拟仿真 [J ] . 光学技术 , 2025 , 51 ( 04 ): 415 - 423 .

Yu Tianxi , Li Long , Jiang Yongxia , et al . Simulation of temperature characteristics of laser additive manufacturing of aluminum alloy plate [J ] . Optical Technology , 2025 , 51 ( 04 ): 415 - 423 .

Wang Y , Wu C , Ma Z , et al . Numerical simulation study of ultraviolet nanosecond laser ablation of Cu-Al 2 O 3 dispersion strengthened alloys [J ] . The International Journal of Advanced Manufacturing Technology , 2023 , 129 ( 5 ): 2153 - 2169 .

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

基于平面激光散射的人体边界层及口呼吸可视化研究